How can I purify the air in the water tank? Teach you a coup.

Small coup of Pacific Auto Network: 1. After filling antifreeze, open the water tank cover, then insert the key and turn on the ignition switch. 2, air conditioning warm air mode, the highest temperature modulation, minimum air volume modulation. 3. The running lights are turned on, that is, the headlight switch is turned to the right for one gear. 4. Step on the accelerator 10 seconds or so. Note: 1. Exhaust must be carried out when the engine is cold. 2. It is forbidden to open the water tank cover or drain valve under the condition of high antifreeze temperature to avoid burns.

The performance of air in the automobile water tank is actually that the antifreeze in the water tank has air resistance, which will lead to poor circulation of coolant. Imagine that after you fill up with antifreeze, you can't circulate in the engine at normal speed, and finally there will be a high temperature alarm, and you haven't seen the reason for it for a long time. It is likely that too much air has entered the water tank.

The engine cooling system is to dissipate part of the heat absorbed by the heated parts in time to ensure that the engine works at the most suitable temperature. The main components are thermostat, water pump, water pump belt, radiator, cooling fan, water temperature sensor, liquid storage tank and heating device (similar to radiator).

The cooling system of automobile engine is a forced circulating water cooling system, that is, the pressure of coolant is increased by a water pump, so that coolant is forced to circulate in the engine. The cooling system is mainly composed of water pump, radiator, cooling fan, compensation water tank, thermostat, water jacket and accessories in engine block and cylinder head.

(Photo/Text/Photo: Pacific Auto Network Zhu Zhenduo)