1. First unscrew the left and right horn covers of the car, as shown in the figure.
2. Then tilt the middle windshield, and then take out the screws, as shown in the figure.
3. As shown in the figure, remove the two screws under the cigarette lighter.
4. Then remove the screws in the glove box, as shown in the figure.
5. Then you need to remove the switch on the front cover and the screws on both sides of the bar, as shown in the figure.
6. As shown in the figure, unplug the hose outside the heater water tank.
7. After removing the heater, you will see the heater tank as shown in the figure.
8. Finally, remove the heater tank, and it is finished.
Extended data:
Structure of automobile warm air water tank;
Automobile water tank is mainly composed of radiator core, water pipe, cooling blades, upper water tank and lower water tank.
The upper water tank is on the radiator, and the upper water tank is connected with the water tank below the radiator through a water pipe. When hot water flows from top to bottom to the lower water tank, it becomes warm water, and the cooling blades form a conduit. Through the suction of the fan and the relative wind speed when the car is moving forward, a large amount of cold air passes through the air duct to absorb the heat of the cooling water flowing through the water pipe, and then it is emitted to the atmosphere.
Baidu encyclopedia-automobile water tank