1. First, remove the workbench. The workbench has nine screws. Pay attention to where there are screws. There are screws at the lower two edges of the workbench, and there are two screws just above the wheel arch.
2. Dismantle the instrument assembly, and pay attention to the instrument connecting wire during disassembly to avoid breaking.
3. After the instrument assembly is removed, the whole picture of the heater is leaked. The heater is connected with three screws. Remove the upper one first, and then remove the other two screws.
4. Then remove the water pipe connected to the heater water tank.
5. The warmest air tank can be taken out.
6. Remember not to remove the connecting wires, connecting screws and connecting water pipes one by one before taking out the water tank. I hope it helps you.