What is the treatment method for asbestos tile seepage?
1, the service life of asbestos tile is generally not long, generally only about 4 years. If it is often exposed to wind, water and rain, it is easier to seep. When the asbestos shingle leaks water, waterproof glue can be used to block the leaking part, or a layer of improved asphalt waterproofing membrane can be laid at the leaking part of the asbestos shingle, or a water tank can be connected at the leaking part to lead the water to the outside.
2. If the asbestos tile has a serious degree of water seepage, then you can directly replace it with a new one, or spread a layer of plastic wrap on it, or prepare some cement slurry according to a certain proportion, and then apply the cement slurry at the position where the water seepage occurs.
Asbestos tile is widely used in building roofs because of its light weight and simple installation, but it has been gradually eliminated because it contains a kind of fine fiber. When asbestos shingles are broken, these tiny fibers will be blown away in the air and easily inhaled into the lungs, which will lead to diseases such as lung disease.
In addition, the quality of asbestos tile is very light. In case of strong wind, it is easy to be blown into the air and then fall down. If there are cars or people, asbestos tiles are easily damaged, or people will be injured. If asbestos shingles must be used, they must be installed firmly to avoid falling off.
The above is a detailed introduction of asbestos tile seepage treatment, hoping to help everyone. When asbestos shingles are leaking, waterproof glue can be used to block the leaking parts, or a layer of improved asphalt waterproofing membrane can be laid at the leaking parts of asbestos shingles.