Someone should watch when you deflate. Because the deflation hose is likely to jump off. Prepare a towel and wrap it around the valve, then open the valve with pliers. Be careful not to let the water flow everywhere, and then shut down return pipe. First, close the main valve of the return water main. The main valve is a long green or red handle, which will automatically close when it rotates 90 degrees. If the method is the same as above, just connect the pipe to the exhaust valve of the return water of the water separator.
Extended data:
Precautions:
Floor heating costs a lot. Once a place leaks water, all the pipes in the leaking room must be dug out and re-laid, which requires a lot of work and daily maintenance is very important. After laying the geothermal system, the ground cannot be nailed, drilled, drilled or baked by fire to prevent leakage.
It is best to add a protective cover to the exposed pipeline near the distribution manifold of geothermal system to prevent the parts from cracking and prevent the water in the heating pipe from freezing and blocking the pipeline. High temperature heat sources should also be avoided on the ground where geothermal pipelines are laid, so as not to damage the pipeline system. Conditional floor heating system should be cleaned once a year to ensure the clean and smooth water circulation.
Baidu encyclopedia-floor heating