Adhere the mirror to the base of the wood board:
1. Use foam double-sided tape (as shown in the picture) to stick it around and in the middle according to the size of the mirror for temporary fixation-- --The surface tape does not have the effect of long-term bonding and will fall off on its own over time;
2. After using double-sided tape to seal the spots, use neutral silicone structural glue (as shown below) Dot or pull wires at various locations - it ultimately plays a bonding role, so it should be covered in all locations - the thickness of the structural adhesive exceeds the height of the double-sided tape; because it is neutral, don't worry about the mercury on the back of the mirror. There is corrosion.
3. Place the mirror in the predetermined position and press it tightly on the double-sided tape.
4. Use porcelain white glue to seal and smooth the surroundings of the mirror.