take a look at the following to deal with it.
1. check whether the water tank cover is fastened.
2. Try to inject gas into the water tank to see where the water in the water tank seeps out when it is under pressure, and then decide the repair plan.
3. Unscrew the engine oil cover to see if there are any traces of oil emulsification. If there are, disassemble the engine and replace the cylinder gasket.
If the water pipe in the water tank leaks due to vehicle vibration or vehicle accident while the vehicle is running, measures can be taken according to the specific situation:
When the water leakage does not exceed a crack of 1mm or a hole of 2mm, add a bottle of strong water tank plugging agent to the water tank to start the vehicle running.
5-1 minutes after turning on the cooling water and starting the large-scale circulation, no matter whether it is the water tank, the rubber pipes and all the pads in the cooling system, the leakage will stop, and there is no need to release it after the leakage is stopped, which will not affect the heat dissipation and block.
if there is no leakage stopping agent to carry, some radiating pipes leak slightly, you can temporarily put loose cut tobacco into the water tank, and use the water circulation pressure to block the cut tobacco at the leaking part of the radiating pipe for temporary use.