How to wear the jadeite peace buckle pendant so that it looks good
In terms of wearing method, the jade peace buckle can first be worn as a pendant and worn around the neck, which can make the wearer appear generous and more dignified. Elegant, with the meaning of wishing you peace and security.
The jade safety buckle can be worn with a metal chain, gold or jade, or with a rope. It all looks good, but the decision mainly depends on personal preference.
First pass the rope through the eye of the safety buckle, remember to put two pieces together. Lower the two top ropes. Move the rope on the right to the left, making sure it is on top of the two ropes. Remove the rope on the left and place it on top. Pass this rope underneath.
More people like to inlay jade safety buckles, use gold, platinum and other precious metals as the bottom frame or decoration, or inlay some diamonds, and finally hang them around the neck with a cord or metal chain. This wearing method can make the wearer more elegant and noble. Most women choose inlaid jade safety buckles.
The simplest way to wear a Ping An buckle pendant is to wear it around the neck. Although there are many precious metal materials that can be used as necklaces, it is best to choose a strong red rope or a Ping An buckle pendant necklace. black rope.
Question 1: How to wear the safety buckle well? Check whether it is big or small. If it is small, it will look beautiful when worn on the ear with a thread. If it is big, it can be worn on the hand or around the neck. It is recommended to wear it around the neck. For a better look, go to a jewelry store and buy a rope with beads, it will be very beautiful and elegant. How to buckle the jade pendant
Jade pendants are usually worn directly with a red rope, which is not only simple, but also comfortable to wear, elegant and beautiful. Of course, you can also choose the corresponding position for decoration according to the size and weight of the pendant. In addition to wearing it around your neck, you can also hang it on your waist.
Half-fold knot: Jade necklace can be tied with a half-fold knot. First fold the rope in half and pass it through the jade pendant, then thread the end of the rope with the thread end into the section of rope with the circle, tie the rope, and then Adjust the jade necklace to see if it is strong.
Roast the rope over fire, draw it while it is hot and pinch it thinly so that it can pass through the hole. Then pass the rope ends together through the hanging hole. Leave an appropriate length of binding such as 1cm. Then open one end of the rope and wrap it around to the other side to tie a knot. Then go around to the other side and tie a knot. Then reverse the knot again.
Here we take a pearl necklace as an example. First choose a screw necklace clasp. Then pass a piece of thread through one end of the turnbuckle, secure it with a small bead a little larger than the hole in the turnbuckle, and tie it directly. Pull the beads and knotted cord into the turnbuckle and secure the other end of the turnbuckle in the same way. How to make an jade buckle
You can install it at home. The specific operation method: first pass the needle of the buckle through the hole of the jade Buddha pendant, and then pass it through the clip behind the buckle. hole, press a little tighter. If the needle feels too long, you can use ordinary scissors to cut it off a little, leaving a little bit to bend it.
First, burn the end of the rope with a lighter, and quickly twist it into thin threads with your hands. Be careful not to burn your hands. Pass the rope through the front hole of the pendant. Make sure to leave a certain distance after passing through it. You can reserve the length according to actual needs. Tie a knot in two threads, then pick up one thread and wrap it around.
Put the two ropes through the eyes of the jade button at the same time, then separate the two ropes to the left and right, put them down and pass them through each other to tighten. First pass the rope through the eye of the jade button, remember to put two ropes in one piece, and then put down the two top ropes.
Threading the needle: First, pass the needle of the clip through the jade, and then pass the needle through the small hole on the back of the clip. Break the needle: The grown needle can be bent upward or downward, and then sharpened with a nail clipper until it does not scratch your hand.
The first is to select raw materials. Beads have very strict requirements on raw materials. Cut the chamfer, draw the diameter of the bead, and then cut it. After cutting out the right cylinder, you must remove the edges and corners, and the edges and corners are directly ground off. Grind, use a bead grinder to round the small jadeite material, and gradually form a spherical shape. How to hang a jadeite Ruyi buckle
1. Jade safety buckle inherits the appearance of ancient jade carvings to a certain extent. It is shaped like a button, with an outer drum and a concave inner ring. From the appearance, the outer ring is round and the inner ring is round. It is also round, giving the whole body a smooth feeling.
2. One is to use a lighter to burn the rope and twist it thinly: you can use a lighter to burn the rope, and while it is hot, twist the head of the rope until it is as hard as a needle, and you can wear it. .
3. First pass the rope through the eye of the safety buckle, remember to put two pieces together.
Lower the two top ropes. Move the rope on the right to the left, making sure it is on top of the two ropes. Remove the rope on the left and place it on top. Pass this rope underneath.
4. Use a torch to burn the ends of the two ropes on the lanyard, pinch the ropes together while they are hot and smooth them so that they can pass through the holes of the jade pendant. Pass the burned rope end through the hole of the jade pendant. Leave an appropriate length of binding according to personal preference.
5. The jade pendant can be tied and braided, loosen the perforations on the jade pendant rope, pass the rope through the pendant in one direction, then cross the ropes on both sides, pass through the small holes in the rope, and then leave Lower the hole, and then pull from the left rope to the right rope according to the double braiding method.
6. The jade pendant can be worn directly with a red rope, or it can be decorated in the corresponding position according to the size and weight of the pendant, and worn around the neck or waist. You can also set gold, platinum or diamonds on the jade pendant. Choosing buckles of different colors will increase the beauty. It is recommended to choose dark colors such as brown and brown. How to wear an jade safety buckle
It can be worn as a thread and hung around the neck, or if your jade safety buckle is the right size, it can also be used as a bracelet or anklet. It should look good.
The safety buckle is usually worn directly with a red rope, because it is not only simple, but also comfortable to wear, elegant and good-looking. But in fact, the jade safety buckle pendant can also be worn in a corresponding position according to the size and weight of the pendant. For example, it can be used as a pin or sewn on the chest or collar. This is all possible.
The safety buckle is a traditional Chinese Feng Shui ornament that wards off evil spirits. Wearing it on the body has the effect of warding off disasters and solving problems. It can also be used for decoration. It can be worn around the neck or wrist with a red rope. It can be worn on the car or placed in the car, which can protect safety and make the wearer look more dignified and elegant.
Most of the Ping An buckles are made of jadeite. Like this natural jadeite pendant with floating flowers on Taocui.com, although the jade is hard, it is brittle, so wearing the Ping An buckle It is forbidden to engage in sports with high physical conflict such as wrestling and fighting to avoid damage to the equipment.