Suggestions on installing toilets that are not easy to block.

The process of installing the toilet is very simple, but if the details are not carefully considered, it is easy to have the problem of blockage. The following are some suggestions for installing toilets that are not easy to block.

Choose the right water tank and toilet

It is suggested to choose products with large flow and wide pipeline, which can reduce the probability of blockage. The size of the toilet should be appropriate, not too small, otherwise the probability of blockage will increase greatly.

Correct installation of drainage pipe

The diameter of the drain pipe should match the diameter of the toilet drain pipe. In the installation process, pay attention to the slope of the drainage pipeline to ensure that the excrement can be discharged from the pipeline smoothly.

Install the water tank and toilet correctly.

Before installing the toilet and water tank, the sundries and accumulated water in the installation area should be removed, and the ground should be level. When installing, seal the pipe fittings with high-temperature resistant waterproof glue to ensure that the joint between the water tank and the toilet is safe and firm.

Daily maintenance

In the normal use of the toilet, non-biodegradable substances such as large hard objects and toilet paper should be avoided from being discharged into the toilet. In addition, the toilet should be cleaned regularly, and anti-blocking agent should be used to keep the drainage unblocked.