Can I open a water washing factory in rural areas, and what relevant procedures do I need to go through? Of course you have to play this!
Go to the industrial and commercial department, that's fine.
Do you need to go through the relevant procedures for the transformation of old rural villages? (6) The main contents of the first-level land development.
Raise all the funds for the first-level land development, and be responsible for completing the following tasks:
1. Go through the preliminary procedures such as project establishment and pre-examination of construction land;
2. Go through the relevant procedures for land acquisition, sign a compensation agreement for land acquisition and resettlement with the town and village collective organizations, pay the corresponding fees, and expropriate the collective land as state-owned land;
3. Handle relevant demolition procedures, sign demolition, resettlement compensation and acquisition compensation agreements with the owners (users) within the scope of the project land, determine the relocation plan, and pay corresponding expenses;
4. According to the specific requirements of municipal planning, handle the preliminary procedures, engineering design and construction of municipal construction. The specific requirements are "eight connections and one leveling", that is, water supply, drainage (rain and sewage), power supply, heating, ventilation, telecommunications, cable TV, access and site leveling;
5. Archaeological exploration work;
6 after the acceptance of the project, the land administrative department shall organize the land to enter the market.
Hope to adopt. Thank you.
Do I need a license to open a shop online? Do you need any formalities? The process of opening a shop online
The first step is not online at first, but in your mind.
You need to find out what kind of store you want to open. At this point, there is no difference between opening an online store and opening a traditional store. Finding a good market and having competitive products are the cornerstones of success.
The second step is to choose a platform or website to open a shop.
You need to choose a website that provides a personal store platform and register as a user. This step is very important.
Most websites will require the registration of valid certificates such as real name and ID card. When choosing a website, popularity, whether to charge or not, and the charging situation are all very important indicators. Now many platforms offer free shop opening services, which can save you a lot of gold.
The third step is to apply to the website for opening a shop.
You should fill in the classification of goods provided by your store in detail. For example, if you sell fashion watches, you should classify it as "watch" among "jewelry, watches and glasses" so that your target users can find you accurately. Then you need to give your shop an eye-catching name. Which store the user clicks on in the list depends more on whether the name is attractive. Some online stores display personal information, so you should fill it in truthfully to increase trust.
The fourth step is to purchase goods.
You can purchase goods from familiar channels and platforms. Controlling costs and purchasing goods at low prices are the key.
Step 5, log in to the product.
You need to fill in the name, origin, location, nature, appearance, quantity, trading method, trading time limit and other information of each product on the website, preferably with pictures of the products. The name should be as comprehensive as possible, highlighting the advantages, because when others search for such goods, only the name will be displayed on the list. In order to increase the attraction, the picture quality should be as good as possible and the description should be as detailed as possible. If it must be mailed, it is best to specify who is responsible for the postage.
Another important thing when logging in is to set the price. Usually the website will provide the starting price, reserve price, biting price and other items set by the seller. Suppose the seller wants to sell a dress with a purchase price of 100 yuan, and intends to sell 150 yuan. If you are a traditional shopkeeper, first bid the price of 150 yuan, and if you can't sell it, lower the price a little. But online bidding is different, the seller must first set a starting price, and the buyer will bid upwards from now on. The lower the starting price, the more interested buyers are. Some sellers set the starting price of 1 yuan, which is a good way to attract attention.
But if the starting price is too low, there is a risk that the final transaction price is too low. Therefore, the seller had better set the bottom price at the same time, such as setting 105 yuan as the bottom price to ensure that the goods will not be bought below the cost. Another disadvantage of low starting price is that it may imply that you are willing to sell goods at a very low price, thus making the auction hover at a very low price. If the seller thinks that waiting for the auction is too long, he can set a price. Once a buyer is willing to pay this price, the goods will be sold immediately. The disadvantage is that it is impossible to raise the price if several buyers are interested. Sellers should make use of these settings according to their own specific conditions.
The sixth step is marketing promotion.
In order to enhance the popularity of your own store, marketing promotion should be properly carried out at the beginning of opening the store, but it is not enough to be limited to the Internet, and it should be promoted through online and offline channels. For example, buy the location of "popular product recommendation" on the high-traffic page of the website, bold the product name on the product classification list, and add pictures to attract attention. You can also use free advertisements, such as exchanging links with other stores and websites.
What procedures do I need to go through to start a company in Hong Kong? Information required to register a Hong Kong company: 1. Scanned ID cards and signature samples of directors and shareholders. 2. Chinese and English of the company; Now it is 2000, and the cancellation time is relatively long, usually 6-8 months. You should know the agent of Evergrande International.
Several problems needing attention in running a baking-free brick factory! The production and use of clay red bricks have been banned in various places. Why do we still use clay red bricks locally?
A: Due to the differences in per capita arable land area, economic level and resources in different regions, clay bricks are still used in some regions. The main reason is that the local brick factory has not been rebuilt in time, and there are no new wall materials such as baking-free bricks to replace clay bricks, but they can't stop building houses, which leads to the existence of clay red bricks in a short time. But the market prospects and business opportunities brought by this are also the best time for you to invest and set up a factory and stay ahead of others. At this time, the profit margin of producing baking-free bricks is also the largest.
2. What is the strength of this baking-free brick compared with clay red brick? What is its service life?
Answer: The quantity of clay red brick (240× 1 15×53mm) is generally 75 to 100. The baking-free bricks produced by our technology are designed in strict accordance with the standard above 100, and the strength fully meets the standard. Due to the reaction between fly ash and volcanic ash of other materials, calcium silicate hydrate and calcium aluminate gel are generated, which fills the pores, enhances the cohesive force and promotes the long-term growth of strength. The cured product has good durability and stability. Theory and practice prove that its later strength increases and its service life is longer than that of clay brick.
3. What material is used to produce baking-free bricks with the lowest cost? How does its cost compare with that of clay bricks?
Answer: As long as you have industrial waste resources such as fly ash, slag, coal gangue, sand, stone powder and slag, which material is the cheapest and richest, the cost of making bricks with this material is the lowest. The baking-free brick produced by JFS excitation technology in our hospital uses the least amount of cement, and high-activity materials can be produced without cement. The production process is baking-free and steaming-free, and the production cost is lower than that of clay bricks. In addition, in order to vigorously promote new wall materials, the state collects 8 yuan's wall reform fund per square meter to subsidize the new wall material factory, so that the wall cost per square meter is 16 yuan (actually, compared with clay bricks, each baking-free brick has an advantage of 0. 1 1 yuan before sale).
& gt4. Can hollow blocks only be used as fences and infilled walls?
A: In the 1980s, the production of hollow blocks in China was in the primary stage, and the backward technology left a bad impression on people, thinking that they could only make fences. With the development of science and technology, block has been widely used in non-load-bearing wall and load-bearing wall buildings. The load-bearing hollow block produced by professional technology is the leading product of load-bearing wall materials, and its strength is higher than that of clay red brick. & lt
Due to traditional habits, hollow blocks are not known to ordinary people in our countryside, so what brick is the most competitive compared with traditional clay red bricks?
& lt A: According to the traditional construction and usage habits, we have developed a series of perforated brick products. The block design fully considers the construction environment, conditions and habits, and has the characteristics of light weight and cutting. Like the traditional clay brick, the work efficiency is doubled, the labor intensity of workers is greatly reduced, and auxiliary materials such as mortar are saved. By adjusting the formula, we can produce a series of products from 15 to 150, which are suitable for all kinds of building walls. Brick-concrete houses can be built without clay bricks. Therefore, perforated brick is the most competitive wall material in rural market.
6. Has the production of this baking-free brick been approved by the local construction department?
A: First of all, the project of setting up a baking-free brick and tile factory is an environmental protection project that benefits the country and the people. It is strongly advocated and supported by * * *, which conforms to the national industrial policy. * * * The task of supporting the new wall material factory has been assigned to every local construction committee and wall renovation office. Secondly, by taking advantage of our technical advantages, the products that meet the standards can completely pass the supervision and inspection of the quality inspection department, and we also provide national tax exemption policy documents and various software support. Therefore, with the assistance of the competent department of * * *, the local wall material market can be completely occupied, and the clay red brick will be eliminated eventually. & lt/P & gt；
& ltP>7. What is the development history of baking-free brick machine in China? & lt/P & gt；
& ltP> A: In the 1980s, China took the lead in developing an extruded eight-hole brick-making machine, which was the first of its kind. However, its disc can only press one brick at a time, and its output is low, which can not meet the output requirements of ordinary brick and tile factories. In order to increase output, some mechanical engineers have developed a honeycomb briquette machine, which can press two bricks, three bricks or even four bricks at a time. Although brick is made without pallet and palletized directly, it does not conform to the working principle of mechanical continuity, and the final development failed. For a long time, there has been no factory in China to produce bricks normally with this equipment, which belongs to non-standard equipment. In 1990s, based on the introduction of foreign wall machinery, China developed a hollow block forming machine, which laid the foundation for the development of new wall machinery in China. & lt/P & gt；
& ltP> entered the 2 1 century. With the development of building materials machinery, block molding machines have blossomed everywhere, but the new wall material-hollow block is unknown in rural areas of China, so the multifunctional brick (block) machine was born.
8. How to choose equipment for operating a non-burning brick and tile factory? The bigger the equipment, the better? Answer: According to the development course of China's baking-free brick machine, we should first consider the fully functional equipment, that is to say, we should pay special attention to whether the brick making machine can be equipped with perforated brick molds, hollow block molds and standard brick molds, and whether other brick molds can be designed. In addition, the number of blocks formed each time is also very important, which directly affects the output.
Excuse me! If you open a clothing store in the village, what documents do you need! How to deal with it! The so-called trial operation before obtaining a business license is completely nonsense. You must have a license to do business, otherwise it is illegal to operate without a license. I suggest you go to the industrial and commercial office to apply for a self-employed business license. 23 yuan. Materials include ID card, copy of shop real estate license or land certificate, lease contract and photo of certificate.
What are the relevant procedures for handling a small cooking raw material factory? Business license, hug certificate, raw material production license, health certificate.
If you are at home, there should be no formalities.
If you advertise for a factory,
Need to register a deposit, etc.
It is recommended to consult the local industry and commerce.
Some regulations of local management should be different.
And ask the relevant departments for information. I wish you a prosperous business.
What is the prospect of buying a baking-free brick machine to run a baking-free brick factory? This needs to be selected according to your output and capital situation. If you don't understand the equipment and technology, it will be quite troublesome to run a brick factory smoothly.
What are the relevant procedures for opening a public bathhouse (bathhouse) in Weihai, Shandong? The more detailed, the better! Thank you. Open the bathroom to go through the following process:
I. Site Selection
Second, the decoration
Three. Installation of bathroom equipment and boiler
Fourth, install bathroom equipment.
Verb (abbreviation for verb) is cleaned up and ready to start business.
Sixth, the opening.
Of course, in this process, we should do the following things at the same time.
First, apply for a business license
Second, apply for a health permit.
Third, environmental protection acceptance
Fourth, the fire application
The last item should be applied if it is in the urban area, but it is generally unnecessary to apply if it is not in the urban area.