How to see several circuits in cad floor heating

the floor heating pipe distributor, also known as the water separator, is generally located under the cabinet. Look at the pairs of supply and return interfaces below, which are just a few loops. Under normal circumstances, one bedroom has one loop, one living room and one dining room. If it has been installed, just count several inlets and outlets, one inlet and one outlet, which are a loop. The floor heating distributor and water collector refers to the device used to connect the main heating water supply pipe and the return pipe in the floor heating system. The floor heating water separator is a water distribution and water collection device used to connect the supply and return water of each heating pipe in the water system. Its main functions are pressurization, decompression, pressure stabilization and diversion.

tips for using the floor heating water separator

1. The water separator can control the water supply flow of each room or area in different ways. For example, if any rotary core valve on the water separator is closed by half, the temperature of the water heating room will be reduced.

second, the manual exhaust valve on the water separator, in case of poor heating and gas blockage during heating in winter, users can use the exhaust device to manually exhaust the gas in the floor heating pipeline to ensure the normal circulation of hot water.

3. There is a filter on the front end of the water separator. Users take down the filter screen at the lower end of the filter regularly or irregularly during the heating period every year, clean it and install it to ensure the cleanliness of the water pipe. After heating, clean water should be used to flush the pipe network.