What are the installation locations of air conditioners?

Summer is here, and many friends who have just finished decorating have begun to choose home appliances. Air conditioning is naturally an essential household appliance. But what's the point of installing air conditioning? These three details are easily overlooked, and everyone needs to pay attention!

1. Don't point the air conditioner at the bedside.

When decorating the air conditioner, the location of the air conditioner is particular. If the installation location is not suitable, it is likely to suffer from air conditioning in the next few years or even more than ten years. Originally, I turned on the air conditioner to enjoy it, but I didn't expect to ask for trouble. If you can choose, try to install the air conditioner on the bedside or side to avoid the air conditioner blowing against your head. It is easy to catch a cold if the air conditioner is blown directly.

Of course, if you want to prevent direct blowing, you should pay special attention to the "anti-direct blowing function" when purchasing air conditioners. Take konka intelligent fresh air air conditioner KFR-35GW/HAXF 1 for example. This air conditioner adopts wide-angle air supply and supports one-button direct blow prevention. The machine is equipped with herringbone air deflector, so the air supply will be mild and there will be no direct blowing.

2. The socket should be as close as possible to the air conditioning hole.

Installing air conditioner requires punching holes in the wall, which will also affect the appearance. And some fresh air conditioners need two holes. If you have a choice, of course, the more beautiful the better. The traditional fresh air air conditioner needs to make fresh air holes in addition to the tuyere. Later, only one hole can be used, but reaming is needed. In fact, with the progress of science and technology, there are also new solutions.

Konka intelligent fresh air air air conditioner KFR-35GW/HAXF 1 can be installed by using the original hole position, and only one hole with a diameter of 63mm is needed, which is more convenient and beautiful to install.

3. The installation height should not be too high.

Many people install air conditioners not far from the roof, which is actually wrong. Although this installation method can avoid direct blowing, it also increases the difficulty of later cleaning. Many people may think that air conditioners don't need to be cleaned regularly, but in fact, a lot of bacteria and dust will breed in air conditioners.

If you want to save the trouble of later cleaning, you should pay attention to the self-cleaning function when choosing air conditioners. Konka intelligent fresh air air conditioner KFR-35GW/HAXF 1 is equipped with the fifth generation self-cleaning capability, which can be started with one button when standby, realizing automatic steaming and washing at 57℃. It can be done in 30 minutes, and the fire extinguishing rate is as high as 99.99%.

In addition, konka intelligent fresh air conditioner KFR-35GW/HAXF 1 also adopts a dual-drive fresh air system and is equipped with a five-layer filter screen, which can not only filter out impurities and dust in the air, but also effectively keep harmful gases such as PM2.5 and formaldehyde out of the room to ensure that the indoor air is always fresh.