The solution is simple: drop some oil or cooking oil on the hinge of the door shaft and a few on several hinges. Repeatedly open and close the door several times after dripping to eliminate the noise of the door.
Is there any way to squeak the door? Try to oil the hinge.
Is the squeaking of the door at home good for feng shui? This is not good for the master, it hurts his god, and everything is unlucky. It's all the mouths of a family, and the owner should have tongue and mouth disease.
What if the refrigerator door creaks as soon as it is opened and closed? Is there any way to keep it quiet? There is a shaft above and below the door. Take a syringe and pump some oil into the shaft, not too much, any oil will do.
From the hinges of your car door, you can put some oil on them or change some hinges. It is useful without engine oil and can be treated with edible oil. If you use a little lead powder in a noisy place, it won't ring. Pencils can be ground into powder without lead powder.
The floor feet at home are always creaking. How to solve the problem: first, the quality of wooden floor is not good during decoration, and second, the ground is not leveled before paving.
1, there is a radical solution, re-tying earthworms and re-watering the floor, which is really a headache. No one wants to fight back and re-water. Therefore, only before installing the earthworm and the floor, pay attention to the technology and method of floor installation, so that the floor will not make a sound.
2. Of course, for families with creaking wooden floors, they should go to the installation company for maintenance and reprocessing in time.
The ceiling fan at home has recently started to squeak, regardless of high speed or low speed. It's not easy to add unless it's removed. The motor has two bearings, one on the top and the other on the bottom. Except for the hole in the upper boom, all other places are closed. . . .
How to solve the squeak when opening the door? Just add a little oil to the hinge of the door. Please adopt it. Thank you!
The light switch at home creaks when it is turned on. Is it dangerous not to use it? As soon as the light switch is turned on, it means poor contact. You can open and clean the contacts. If you don't turn on the light, of course there is no danger.
Is there any way to solve the problem of squeaking refrigerator? 1, the noise of the refrigerator mainly comes from the working sound of the compressor;
2. The sound of evaporator or condenser expanding with heat and contracting with cold;
3. There is vibration between the pipeline and * * *;
4. The sound of refrigerant in the pipeline;
5. The sound generated by uneven product placement.
6. Take different methods to eliminate different phenomena, such as adding damping blocks, damping blocks, fixing parts, defrosting, etc.
1. Adjust the balance of the four feet at the bottom of the refrigerator. The refrigerator should be placed in a flat and firm place. Make the four feet at the bottom of the refrigerator on the same plane to achieve balance. Many refrigerators have four-legged adjustment balance knobs at the bottom, which can be adjusted and fixed when the noise is minimal. If there is no balance knob device, a rubber pad can be added to the bottom of the refrigerator to achieve balance and reduce noise.
2. The pipes and boxes are reinforced firmly. It is necessary to check whether the reinforced part connected between the external pipeline and the box is loose to avoid the vibration of the compressor when it works. Therefore, the external pipeline must be fixed, and spring washers should be added to the bolts to prevent looseness.
3. The compressor base should be firmly fastened. If you press the compressor tightly with your hand, the noise will be obviously reduced, and the noise will increase when you raise your hand. Generally, it is caused by uneven stress on the vibration damping rubber pad fixed on the compressor base, loose bolts and unstable compressor bottom plate. You should adjust and tighten the connecting bolts and replace the washers that have lost elasticity.
4. Accessory devices should be installed firmly. In freezers and freezers, manufacturers provide users with accessories such as ice boxes, layered nets, drawers, etc. These accessories should be firmly installed in a certain position and installed along the trough. Don't put sundries on the top of the refrigerator to prevent vibration from generating noise.
5. Determine whether the compressor is out of order. When you press the top of the compressor, the noise is still not reduced. Usually, the gap between the piston and the cylinder in the compressor is too large, which leads to noise. At this time, the compressor should be replaced. In addition, when the refrigerator is not opened, it is about 3 meters away from the refrigerator, and the boiling sound or interval "squeaking" sound is obviously heard, which belongs to the refrigeration pipeline fault and should be repaired by professionals.