As shown in the figure, there are two valves on the two main water pipes, one for water inlet and one for water return (upward and downward). These two valves are control switches. Closing these two valves is equivalent to closing the whole floor heating system.
Use skills of floor heating water separator
1. The water separator can control the heating temperature of each room or area in a shunt way, and users can adjust the room temperature according to their own needs; Through the manual exhaust valve of the water separator, the user can exhaust the gas in the pipeline by himself to ensure the heating temperature of each pipeline.
2. There is a filter at the front end of the oil-water separator. During the annual heating period, users will remove the filter screen at the lower end of the filter regularly or irregularly, and then install it after cleaning to ensure the cleanliness of the water pipe. Rinse the pipe network with clean water after heating.
3. If you are away from home for a long time, you can turn down the circulating water with the main valve of the water separator, and never turn it off completely. If there is no indoor heating all winter, the water in the pipeline will be blown out. The use of water separator can help us make better use of floor heating, which can not only save our money and manpower, but also achieve better and safer home heating effect.
As a systematic project, floor heating, like air conditioning, belongs to high-power electrical appliances and has its own service life. If consumers use it improperly and maintain it badly, they are likely to die in use.
4. When you start heating, you won't feel the temperature immediately. During this period, the indoor concrete floor gradually heats up to store heat energy, and it can reach the design temperature after 2-4 days. If the user heats himself, the water temperature should not exceed 65℃.