Is the water tank plugging agent harmful?

Pacific car network plugging agent is used for short-term emergency without side effects. In the long run, it may fall off, block the water tank and water pipe and corrode the water tank. The water tank plugging agent has the property of preferentially wetting and adsorbing on the process surface or gap, and then curing, thus preventing the coolant from leaking.

The basic principle of plugging agent is to use the pressure difference inside and outside the leakage point or leakage site. In the process of leakage, the particles with glue move into the leakage gap or gap and gradually accumulate to fill the plug, and the particles are bonded together by the adhesive, thus achieving the purpose of plugging.

Before using the plugging agent, you need to turn on the radiator to check whether the water level in the radiator is in the normal position, then start the engine to make the water temperature of the engine reach 85-90℃. When the water temperature rises, turn off the automobile engine, open the water tank cover, shake the water tank plugging agent evenly, pour it into the water tank after shaking it evenly, and turn on the automobile heating system, and the plugging agent will work.

The plugging agent is suitable for plugging gaps and cracks less than 0.8 mm If the leakage is serious, the plugging agent can't be plugged at all. If there is a little permeability, it can be plugged. It is recommended to weld the best one that can be welded, or take other methods to repair it.