1/7 Step by step reading
The cyclone dust collector selected has the advantages of small resistance loss, low power consumption, simple structure and simple maintenance.
2/7
When the temperature of dusty gas is very high, the cyclone dust collector should be equipped with heat preservation facilities to avoid moisture condensation in it and affect the dust removal effect.
3/7
The amount of gas purified by cyclone dust collector should be consistent with the actual amount of dusty gas to be treated. When choosing a cyclone, the diameter should be as small as possible. If a lot of wind is required, it is recommended to use several small-diameter cyclones in parallel.
4/7
When the gas contains inflammable and explosive dust, cyclone dust collector should be equipped with explosion-proof device.
5/7
The minimum dust particles that can be captured by cyclone dust collector should be slightly smaller than the size of dust particles in the gas to be treated.
6/7
Cyclone dust collector should be sealed to ensure no air leakage.
7/7
The inlet wind speed of cyclone dust collector should be kept at 18 ~ 23m/s, too low will reduce the dust removal efficiency; If it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not be significantly improved.