If the valve is marked, just turn the valve to the corresponding position. Open means that the heating valve is open, and close means that the heating valve is closed. If the heating switch is a handle, turn the handle in the direction of the pipeline to open it and close it at 90 degrees with the pipeline.
A manual regulating valve with a white knob on the radiator or a manual regulating white knob of a self-operated temperature control valve both regulate the temperature of the radiator. If the indoor heating temperature is not hot enough, you can turn on the manual adjustment white knob of the manual valve beside the radiator or the self-operated temperature control valve.
Extended data:
?
The use of heating valve is introduced as follows:
When the floor heating pipeline is not used in winter, that is, when the heating is stopped, there is no need to drain water when it is not used. One more thing, in the season of stopping heating, the valve of floor heating does not need to be closed. Because after stopping heating, it will not cause the floor heating pipeline to rust. In the distribution manifold, there is a filter on the main pipe, so it is impossible for impurities to enter.
The floor heating coil connected below the distribution manifold is exposed on the ground. This place needs to be sheltered from light. When installing floor heating, there is a black protective cover. If not, try to cover it with shading. This is a very important measure to prevent the production of green algae.
Phoenix. The heating pipeline valve needs to be replaced. Most residents are very cold at home (Figure)
Baidu encyclopedia-heating valve