Tiles are materials used in room decoration. A very common problem in wall decoration is hollow tiles. Almost every home will have more or less tile hollows. So why do you have an empty drum? Tile hollowing is the cause of tile hollowing. Method: Do the hollow drums of floor tiles need to be replaced? Let's take a look at it. For the very professional renovation owner, evaluate whether the tiles are close to standard. See if it is flat, as long as you touch it, you can understand that the tiles are hollow. It is said that the tiles are hollow, not single-eyed. Therefore, after the decoration is completed, many people will use a small hammer to tap the tiles and judge whether the tiles have hollows through the sound.
What is the reason for hollow ceramic tiles? How do I avoid ceramic tiles? How to solve the problem of hollow tiles? Let's look at it now. First, tile hollowing may be caused by wall hollowing that is not suitable for direct tiles. Many people mistakenly believe that the better the wall, the better. This is not the case. Too flat walls are not conducive to ceramic tiles because smooth walls cannot easily match ceramic tiles. Therefore, it can be seen that the walls of a large number of rough houses are made of straw treatment, which is more conducive to the walls and tiles. Additionally, it is necessary to properly feed the wall before tiling because if the wall is too dry, the tiles attach to the wall mortar, causing the tiles to hollow out.
On ceramic tiles, it is also necessary to pay attention to the climate. If there is more rain, the humidity in the air is very high, or the temperature is too low, it will affect the bonding between the cement mortar and the ceramic tiles, which will also cause hollowing of the ceramic tiles. So when it’s rainy and low temperature, don’t use porcelain. In order to avoid the problem of hollow tiles, in addition to the wall, you also need to pay attention to soaking the tiles before tiles, so that the tiles themselves can absorb some moisture in advance. However, please note that the entire block is soaked. And master the time when there are no bubbles in the water. In order to apply the physical effect of thermal fibers, it is necessary to pay attention to the sewing when laying the tiles. If the seams are not retained, there will be hollowing problems due to thermal expansion and contraction.
This problem is mainly common in houses. After the construction is completed, it is necessary to check the wall for hollows. The tool used is a drummer with a rounded tip. If there is a gap, there is an empty drum when struck. But hollowing standards for wall tiles and floor tiles are not. Typically, for wall tiles, hollow areas are allowed, but for floor tiles, no hollows at all.