Citroen Elysee water tank is an important part of water-cooled engine. As an important part of the cooling circuit of water-cooled engine, it can absorb the heat of cylinder and prevent the engine from overheating. Because of the large specific heat capacity of water, the temperature of the engine did not rise much after absorbing the heat of the cylinder. Therefore, the heat of the engine is conducted through the liquid circuit of cooling water, with water as the heat carrier, and then dissipated by convection through large-area fins to maintain the appropriate working temperature of the engine.
The water tank of Citroen Elysee is usually filled with cooling liquid instead of water, and its liquid level should be kept between min and max. If it is lower than min, it is necessary to add and must add the coolant of the same brand and specification, otherwise it should be completely replaced. The choice of coolant is mainly based on the local minimum temperature, and it is generally four seasons when leaving the factory. Some car owners will use water instead in summer. It is not impossible, but it is not recommended.
Hit the Citroen Elysee. If there is no water in the water tank, you can add some water first, then hit the Citroen Elysee, slowly add water until it overflows, and then cover it tightly. At the same time, a throttle valve can be added to raise the water temperature. Until the cooling fan works and the fan stops, find a wet towel to cover it and slowly open it to see if it has not reached the standard water level. If it is not enough, it will be replenished in situ. We must attach importance to it.