2. Then tilt the middle windshield and take out the screws, as shown in the figure.
3. As shown in the figure, remove the two screws under the cigarette lighter.
4. Remove the screws in the glove box as shown in the figure.
5. Then remove the front cover switch and the screws on both sides of the crossbar, as shown in the figure.
6. As shown in the figure, unplug the hose outside the heater water tank.
7. Remove the heater and you will see the heater tank, as shown in the figure.
8. Remove the heater water tank to complete the installation.
Extended data:
There are two main reasons why the general car warm air is not hot enough after it is turned on. There is something wrong with the cooling system of the engine or the control mechanism of the warm air, which can't work normally. The owner can check the temperature of the two inlet pipes of the warm air small water tank. If both are hot enough, there is nothing wrong with the heating control mechanism. If they are all cold or hot and cold, there is something wrong with the cooling system.
The cooling system of the engine is blocked by air, which leads to the abnormal operation of the cooling circulation system of the automobile and the problem that the warm air is not hot. If the inlet pipe of the warm air small water tank is hot and the outlet pipe is cold, it means that the small water tank is blocked and needs to be replaced.