Look at the mountains first, then at the water. There are mountains that are buried in peace without water, and mountains manage people's wealth. Water is the dragon's blood, sand meets water, yin meets yang, and water is very important.
Feng Shui believes that Tang Ming's opening up is conducive to training talents and developing its career. Therefore, it is necessary to climb the mountain to see Shuikou and go into the cave to see Tang Ming. Tang Ming means that there must be a vast and flat place in front of the tomb. Only when Tang Ming is open and full of vitality can it have a promising future. On the contrary, cemeteries should not be located in narrow and limited valleys.
As a result, the ancestors can't be clean underground, which easily affects the rest of the ancestors and easily leads to poor fortune for future generations! Therefore, when buying a cemetery or choosing a cemetery, we must stay away from the roots.
A cemetery is a place to rest after death. In fact, there is not much pressure when choosing a cemetery. If you have to pay attention, it should be the overall feng shui of the cemetery.
What if there is no hole in the jade pendant?
If there is no hole, you can consider gold plating, making a base inlay, or weaving a knot to wrap the edge. Of course, you can call again. Generally, non-porous jade ornaments are usually smaller and thinner, and it is better to choose gold-plated ones.
Use sewing needles. Tie the rope to be strung on the jade pendant to the sewing needle, and then let the sewing needle and the rope pass through the hole together. It is recommended to go to a jewelry store and use a special machine to enlarge the hole. The hanging hole of Jade Guanyin is too small and the hanging rope is too old to be replaced. Adding precious metal buckle can fundamentally solve the problem.
Rub the thin thread, and rub the rope end into a thin thread, which can easily pass through the small hole of jadeite. The hole of the jade pendant is too small, so some tools can be used to help thread the rope. For example, you can prepare basic tools first, such as lighters, ropes, and preferably pliers with pointed ends.
Use sewing needles. You can tie the rope on the jade pendant to the sewing needle, then let the sewing needle and the rope pass through the hole together, and then untie the sewing needle. Make the hole bigger.
Jade cards without holes can be considered to be covered with gold and inlaid with bases. You can also make a knot and wrap it up. Personal pendant is the most common method, because most brands now appear in the form of pendants, so you can wear this brand directly on your chest when you buy it.
How to punch holes in jadeite
Jade pendant can choose single-sided diamond, double-sided diamond or ultrasonic diamond according to the situation. Single-sided punching, the more expensive jade pendants are all hand-selected, and then punched on one side. Generally speaking, different jadeite pendants have different punching methods with different qualities and requirements.
Find a beverage bottle, drill a small hole in the outer edge of the bottom of the bottle with a needle or drill, and then fill the beverage bottle with water; When the beverage bottle filled with water is suspended, a small water column will flow out of the small hole, and the cooling device will be completed.
Ultrasonic drilling. Using the high-frequency vibration generated by ultrasonic waves, the small needle drill moves up and down at high speed, driving the abrasive to punch holes. Because the small needle drill does not rotate, it just moves up and down in a high-frequency reciprocating way. Double-sided punching.
Why are many jade beads not round now?
Not a flaw, a flaw means that there are obvious flaws in the jade part of jadeite, such as cracks and black impurities, and the beads are not too round, so it can only be said that the appearance of the bracelet is not perfect. Not a flaw.
This is because the crystal particles that make up jadeite are coarse and disorderly, so they can't be rounded during polishing. It has nothing to do with the manufacturing process, but is closely related to the poor quality of jade.
Answer: It's true. Explanation: The orifice of jadeite beads refers to the small hole through which the beads pass. Generally speaking, the pores of jadeite beads are relatively small, and sometimes they show a reduced shape because of the structure of jadeite.
Because the hole is not vertically displaced, the hole is irregular, and one side is particularly ground, so the hole of Yuzhu is not straight. Jade beads are beads made of jade. Phoenix gall is a natural jade bead, also known as _ dust bead, which is as big as an egg and as red as fire, full of toxicity, nourishing yin and strengthening yang.
There is nothing special between the lines. Most of these beads are old beads, which used to be folk handicrafts, but the processing technology was limited at that time. This kind of beads, no matter what material, are good after precipitation.
The channel wear of jadeite beads can be completed by copper tube inlay. The mosaic technology of copper tubes is similar to that of the moon and stars. From the appearance, the copper tube embedded in the channel adds a metallic luster to the jade bead, just like adding a bright spot to the jade bead and increasing the texture of the jade bead.
Jade gourd pendant without eyes?
1, if there is no perforation, you can consider gold plating, making a backing inlay, or weaving a knot to wrap the edge, and of course you can re-perforate. Generally, jadeite jewelry without perforation is usually smaller and thinner, so it is better to choose gold-plated jewelry.
2. Use sewing needles. Tie the rope to be strung on the jade pendant to the sewing needle, and then let the sewing needle and the rope pass through the hole together. It is recommended to go to a jewelry store and use a special machine to enlarge the hole. The hanging hole of Jade Guanyin is too small and the hanging rope is too old to be replaced. Adding precious metal buckle can fundamentally solve the problem.
3. Twisting, twist the rope end into a thin line, which can easily pass through the small hole of jade. The hole of the jade pendant is too small, so some tools can be used to help thread the rope. For example, you can prepare basic tools first, such as lighters, ropes, and preferably pliers with pointed ends.
It is generally recommended to go to a jewelry store to enlarge the hole with a special machine. If you do it yourself, it is easy to damage the jade pendant and damage the surface of the jade pendant. You need to find someone to repair it, so it is not worth the candle. Connect in series with string.
5, this mainly depends on the texture of jade. Generally, jadeite with good water background may not have holes. Then it needs to be inlaid. You can find some inlaid styles to highlight the beauty of jade. 18K gold inlaid jade pendant is very beautiful.
6, jade pendant can choose single-sided drilling, double-sided drilling or ultrasonic drilling according to the situation. Single-sided punching, the more expensive jade pendants are all hand-selected, and then punched on one side. Generally speaking, different jadeite pendants have different punching methods with different qualities and requirements.
What if the hole of the jade pendant is too small?
1. The hole of the jade pendant is too small. You can use some tools to help thread the rope. For example, you can prepare basic tools first, such as lighters, ropes, and preferably pliers with pointed ends. Then, light one end of the rope with a lighter, and then rub the head of the rope into a thin line, so that it can easily pass through the small hole of the jade.
2. Use sewing needles. Tie the rope to be strung on the jade pendant to the sewing needle, and then let the sewing needle and the rope pass through the hole together. It is recommended to go to a jewelry store and use a special machine to enlarge the hole. The hanging hole of Jade Guanyin is too small and the hanging rope is too old to be replaced. Adding precious metal buckle can fundamentally solve the problem.
3. Burn one end of the lanyard with a lighter, twist it by hand, and cut off the burnt part and the thicker part. Pass one of the ropes through the pendant, and tighten the distance between the rope and the pendant, leaving a certain gap, not too big.