Second, the tools and instruments you carry should be packed firmly with tools, and you are not allowed to throw them anywhere.
Three, in the shaft, derrick and dangerous areas, must strictly abide by the relevant provisions of the mine "aerial work safety technology operating rules".
Four, in the wellbore, derrick, indoor maintenance work, must be someone care, below are not allowed to work at the same time. There must be a contact signal. When dismantling equipment and facilities, procedures must be followed to prevent personal injury. If there is any danger, eliminate it before operation.
Five, maintenance, according to the installation of mechanical equipment will power off. When repairing feng shui pipes, stop feng shui. It is forbidden to cross and conduct welding operations at the same time.
Six, two or more people handling equipment, materials, to unify the password, neatly stacked and firm. Contact each other in the process of disassembly and assembly to prevent misoperation from hurting people.
Seven, when working in the wellbore, according to the situation, the upper part should be set with a safety cover plate, and the lower part should be set with a cover plate. It is not allowed to operate the electric welding equipment in the tank, and it is not allowed to put the equipment under the weldment. In case of fire or explosion.
Eight, homework scaffolding should be set firmly. Do not use damaged safety devices and equipment (such as seat belts).
Nine, are not allowed to use the leakage of wire lighting, work in wet places, when using to work, you must use 12 volt safe voltage. Lighting lines are not allowed to be erected at will. When using a hand-held electric drill, there should be a neutral grounding wire, and gloves are prohibited.
Ten, all fitters, welders, must abide by the operating rules of this type of work, using bench drill, electric drill, grinding wheel, winch and other equipment, must abide by the operating rules of various equipment (special type of work must have an operation certificate).
Eleven, this type of work need lifting operations, must have a rigger and hook worker's operation certificate to operate, and operate according to the above two types of work safety technology operating procedures.