Working principle of water separator

The principle is as follows: Organic solvents are insoluble in water at room temperature, but can form * * * boiling substances, the density of which is lower than that of water. Toluene is common. When the water separator is filled with solvent, the solvent and water are layered in the water separator, water accumulates in the lower part of the water separator, and the solvent flows back to the reaction system. In fact, there are two core points: immiscible with water and less dense than water.

Extended data:

Subject content and scope of application This standard specifies the performance requirements and test methods of water separators. This standard is applicable to the water separator for laying fire hose. Water separator is a fire-fighting equipment that separates the branch of hose from the main pipeline of hose. Each water separator has a water inlet and several water outlets.

The auxiliary equipment of the computer room plays a major auxiliary role in the design and operation of the computer room to ensure the normal operation of the computer room. It is mainly composed of constant pressure device, water processor, water softener, filter, water tank, balance valve and other equipment. 1 constant pressure equipment selection guide; 2. Selection guide for electronic water processors; Guide to the selection of water softener.

Technical parameters of water separator: diameter and length of water separator, number and size of water inlet and outlet of water separator, working pressure of water separator and material of water separator.

The water separator is 1. When there are many pipes, if there are too many fittings such as tees and tees, the energy loss of the system will be great. 2. It is convenient for users to operate. When the water separator is used, the pipeline is smooth and the operation is convenient. 3. Convenient maintenance. The interfaces on the water separator are all flange connections, which can be said to be convenient for disassembly and maintenance. 4. Reduce the system pressure difference.

Structure of water separator: Generally speaking, the distribution manifold is mainly composed of water separator, water collector and fixed bracket. The function of the water separator is to divide the hot water from the heat source into the pipes laid by floor radiant heating in various ways, so as to realize the purpose of heating in different rooms and adjusting the temperature. The water collector collects the low-temperature water separately and fixes it on the wall or ground.

Baidu encyclopedia-water separator