How to clean a large crystal lamp? As a kind of lamps, crystal lamps have unparalleled advantages in creating a luxurious atmosphere. With the development of society, crystal lamps have been continuously improved in shape, color and function. Let's share how to clean large crystal lamps.
How to clean a large crystal lamp 1 without removing the crystal lamp?
1, the simplest cleaning method is to wipe it carefully with a rag and climb up with a portable ladder to clean it carefully.
2. Clean the crystal lamp beads: immerse a soft cloth in water diluted with detergent and gently wipe the front and back of the crystal lamp beads. Don't pinch the beads and pull them down when wiping.
3. When wiping the bracket fittings, don't use water, especially alcohol water, to contact the soft cloth, so as to avoid rubbing the protective film outside the electroplating layer and affecting the luster of the surface of the crystal lamp bracket fittings.
How to clean large crystal lamps
1. Prepare some tools for cleaning lamps: lighting cleaning agent, high-temperature steam spray gun, herringbone ladder and hair dryer.
2. The cleaning of large lamps will be carried out by spraying with a professional high-temperature steam spray gun, and then dried by a hair dryer.
4. Then clean water and special cleaning agent for lighting are injected into the high-temperature steam spray gun.
5. When cleaning the crystal lamp, first press the nozzle button to turn on the switch, then gently turn the knob of the regulating valve to adjust the droplet size according to the work needs, and then turn the knob of the governor to adjust the injection speed and distance.
6. Spray the high-temperature steam spray evenly to all parts of the crystal lamp to increase the rapid decontamination and degreasing effect of the cleaning agent.
7. After the high-temperature steam spray cleaning, we will replace it with a hair dryer to blow dry the surface of the lamps, and be careful not to get too close to the lamps, so as not to damage the lamps too hot.
8. Then turn on the power supply and test whether the lamp is abnormal (whether the lamp lights normally). If there are no problems, we can call it a day.
9. Finally, clean up the cleaned site and complete the cleaning and maintenance of large crystal lamps.
How to clean a large crystal lamp? 2. Cleaning method of crystal lamp.
1. Pave waterproof mats or water-receiving objects. If you need to use a ladder, put it in a good position.
2. Prepare all equipment, tools and cleaning agents and put them in place.
3. Take out the high-temperature steam spray gun, press the steam safety cover and turn it counterclockwise to open it.
4. Inject less than 350ml of clean water (note: it is forbidden to fill the container with water) and tighten it clockwise.
5. Insert the power cord into the 220V AC socket and preheat it for 5-8 minutes to ensure that it is easy to use when cleaning.
6. Remove the capacity cover of the particle ejector. According to the purpose of cleaning the crystal lamp, pour the special cleaning agent into the capacity cover.
7. Add the detergent in the capacity cover to the particle injector and close the capacity cover tightly. Close the regulating valve before injecting the cleaning agent. The diluted cleaning agent shall not exceed the maximum capacity of 5L box.
8. Connect the particle injector to a 220V power supply. In order to ensure the atomization effect, the motor speed range has been limited at the factory. Please don't disassemble and change it without authorization.
9. Carry the particle ejector on your shoulders, and hold the ejector tube with one hand when working. The front of the box is slightly higher than the back.
10. When working, first press the button at the nozzle to turn on the switch, then gently turn the knob of the regulating valve to adjust the droplet size according to the work needs, and then turn the knob of the governor to adjust the spray speed and distance.
1 1. Before close spraying, reduce the flow rate of the regulating valve appropriately. Impurities are not needed to prevent pipeline blockage.
12. After adjusting the flow rate of the regulating valve, spray the whole crystal lamp for 1-2 minutes, and sprinkle the professional crystal lamp cleaner evenly on all parts.
13. Leave the cleaning agent on the surface of the crystal lamp for 3-5 minutes, so that the special cleaning agent can penetrate into the bottom layer of stains and oil stains on the surface of the crystal lamp to make it fall off, dissolve and emulsify.
14. Every time you turn off the power supply, please raise the nozzle to let the cleaning agent in the cleaning agent pipe flow back into the box to prevent dripping.
15. After the spraying work is completed, remove the residual liquid of excess detergent in the particle injector. Inject clean water, turn on the flow, turn on the machine for a while, dry and save.
16. Using a high-temperature steam spray gun, install the extension hose and insert it into the corresponding position until it is completely sealed.
17. Press the steam button gently to see if the steam can be released. Pull back the steam injection lock, lock the steam button and continue to supply steam. (Keep the power on when using)
18. Spray high-temperature steam evenly to all parts of the crystal lamp to increase the rapid decontamination and degreasing effect of the cleaning agent.
19. after use, unplug the high-temperature steam spray gun, cut off the power supply, press the steam button, and release the steam pressure until no steam is ejected.
20. Pour out all the water in the internal high-temperature steam spray gun, dry it and put it in the toolbox.
2 1. Take out the low-pressure demister, open the cover and inject clean water.
22. Adjust the adjustable nozzle to make it slightly fuzzy.
23. Adjust the air pressure of demister to the highest pressure.
24. Put the low-pressure mist eliminator on your shoulder, lock the spray bar in a foggy state, and spray all parts of the crystal lamp evenly with one hand.
25. After spraying, open the air valve to release the residual air pressure, discharge the residual water and put it into the toolbox.
26. Connect the hair dryer to the 220V power supply, adjust it to the hot air state, and blow dry the residual water on the surface of the crystal lamp.
27. Unplug the hair dryer, tidy up the power cord and put it in the toolbox.
28, tidy up the scene, cleaning, packed all the tools.
How to clean large crystal lamp 3 crystal lamp cleaning skills
1, please choose a long and soft brush when cleaning. The longer the hair of the brush, the better. Dust can be removed by electrostatic action.
2. Choose a special crystal lamp cleaner and spray it on the surface of the crystal lamp. This kind of cleaner is similar to alcohol, and has strong volatility, which takes away dust in the process of volatilization, but its actual cleaning ability is not very ideal.
We can also choose to remove the crystal lamp and clean it. If it is a relatively small crystal lamp, you can put it in a container filled with kerosene and clean the surface of the crystal lamp with a toothbrush. Dust that is difficult to clean can be soaked for a while, and then some washing powder can be added for secondary cleaning. If it is a relatively large crystal lamp, the bead string can be disassembled and cleaned separately, but attention should be paid to maintaining the overall balance of the lamp during disassembly. You can't tear it down and wash it at the same time, you should tear it down from both sides at the same time.
4. When cleaning the crystal lamp, in order to ensure safety, you must first cut off the power supply, remove the bulb, and then install it after cleaning, especially when cleaning the lamp holder.
5. The crystal lamp bracket and related accessories shall be cleaned, and the wiping cloth shall be soft and not stained with alcohol or water, so as not to damage the protective film of the bracket and lose its luster.
6. In the cleaning process, if the beaded connection buckle of the crystal lamp is found to be discolored or rusted, it can be replaced directly, so as not to affect the beauty of the crystal lamp.
Generally speaking, there are two main cleaning methods for crystal lamps: special cleaner and kerosene. When cleaning the crystal lamp, we need to pay special attention not to use other corrosive liquid cleaners such as detergents, so as not to damage the electroplated outer film of the crystal lamp. At the same time, sharp equipment should not be used to clean the product surface to avoid scratches.