(1) Large factories and warehouses should be reasonably divided into production areas, storage areas (including open storage areas), production auxiliary facilities areas, administrative office areas, living welfare areas, etc. According to actual needs.
(2) In the same production enterprise, if there are production buildings with different fire risks, buildings with the same or similar fire risks should be arranged together as far as possible, and fire and explosion prevention measures should be taken respectively to facilitate safety management.
(3) Pay attention to the surrounding environment. When choosing the location of factories and warehouses, we should not only consider the safety of our own units, but also consider the safety of enterprises and residents in the factory area. Civil buildings such as office buildings and dormitories shall not be built in the production areas of inflammable and explosive factories and warehouses. In order to facilitate safety and prevent the spread of fire, inflammable and explosive factories and warehouses should be separated from the outside world by physical walls.
(4) Terrain conditions. Liquid warehouses of Class A, B and C should be arranged in low-lying places to avoid the threat of fire to the surrounding environment; If it must be arranged in a higher place, certain fire prevention measures should be taken (such as setting a fire dike that can intercept all spilled liquid). Industrial enterprises, such as acetylene stations, which generate flammable gas when meeting water and experience fire and explosion, are strictly prohibited to be arranged in places that are easily submerged by water. For the explosive warehouse, it is advisable to give priority to the use of terrain, such as choosing a place surrounded by mountains and without buildings nearby to reduce the harm caused by explosion.
(5) Pay attention to the wind direction. Release flammable gases, flammable vapors and. J workshops and devices for burning dust.
(6) Two buildings or open-air production devices that can cause combustion and explosion due to material contact should be arranged separately and keep a sufficient safe distance.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd