Since the establishment of the College, with the correct leadership and strong support of the College Party Committee and the Youth League Committee, our students have made gratifying achievements in provincial and national large-scale academic and scientific activities competitions. Especially in 2009, the students of our institute of technology were promoted to the top 150 in the embedded development competition of Microsoft's "Creative Cup" global advanced student technology competition. In the "Challenge Cup" extracurricular academic and scientific works competition for college students in Hebei Province, he won the special prize for his active solar intelligent light-chasing technology, and then won the third prize in the national "Challenge Cup" finals; For the first time, he won the third prize in the Northeast Division of the 2009 Freescale Smart Car Competition. He won the special prize in the 14th Century Cup Extracurricular Academic and Scientific Works Competition of Yanshan University, the first prize in the Science Park Cup Business Plan Competition and the best creative prize. The intelligent tracking LED street lamp independently developed by the Association for Science and Technology has been put into use on campus.
In order to better develop students' potential practical ability and accumulate strength for future large-scale competitions, the Youth League Committee and the Association for Science and Technology decided to hold the sixth automobile model design and production competition.
Second, the introduction of the contest
Liren College Car Model Design and Production Competition is a school-wide science and technology production activity for college students, sponsored by the Committee of Liren College of Yanshan University by the Communist Youth League and undertaken by the Student Science and Technology Association of Liren College of Yanshan University.
The first car model design and production competition was held in 2004 and has been held for five times so far. It requires students to independently design and develop automobile model circuits. The main purpose of the car model design and production competition is to cultivate and train students' hands-on and brain-thinking abilities, enliven the scientific and cultural atmosphere of our college, and cultivate practical and innovative talents for our students to participate in provincial (city) and national science and technology competitions.
This competition is aimed at the students of the whole hospital. By participating in the competition, students can improve their ability to use their hands and brains, cultivate their sense of innovation, and combine their professional knowledge to create a good academic atmosphere. In addition, this competition also provides a stage for students of all abilities to show themselves. There are three events in this competition, namely, competitive group, performance group and model group.
Introduce competitive groups
Racing is the main competition of the competitive group. The contestants of the participating groups modify the racing car according to the racing drawings and materials provided by the official competition, so that the car can reach the best running state and run at the fastest speed. The judges of the competition group make a comparison according to the revised schemes of each group, and finally decide the qualification of each group. Competitive group competition mainly tests the players' hands-on ability and the operation level of the car. (Plan 6- 10 Project)
Brief introduction of demonstration group
Teams are required to submit the design scheme to the competition group, and the competition group agrees before they can participate in the competition. The team made multifunctional robots, model planes, hulls and manipulators according to their own design schemes. The final requirement is to demonstrate the expected function. The exhibition group competition is to test the hands-on production ability and innovative thinking of the contestants. (Plan 5 sets/set)
Brief introduction of model group
According to their own design scheme, the participating teams make simulated physical models, such as cars, boats, tanks, buildings, etc., and hold exhibitions and competitions.
Third, the theme of the contest
The purpose of the contest: to show the innovative charm of students, to show their technical style, to exercise their practical ability and to promote their all-round development.
Four. Overview of competition
1. Competition time:1October 30th 20 10/0.
2. Location: Liren Stone
3. Competition participants:
A. Leading teachers: JASON ZHANG, etc
B main person in charge: chairman Duan and vice chairman Zhang kuikui.
C. Students: all students of Liren College
4. The management departments in the enterprise
Organizer: * * Committee of Liren College of the Communist Youth League of Yanshan University
Organizer: Liren University Student Science and Technology Association
Co-organizer: Liren University Association for Science and Technology (scientific and technological activity organization)
Master planner: JASON ZHANG
Planning: Zhang Zhihui
Executive planning: paragraph, etc.
Preparation of verbs (abbreviation of verb)
1. Early publicity
Including broadcasting in advance, posting posters, posting banners, billboards, road signs, etc.
A the draft broadcast should be submitted to the radio station three days before the broadcast (prepared by the secretariat).
B. Publicity board (under the responsibility of the Propaganda Department and supported by the Technical Department)
2. A billboard with text as the main content: the theme, time, place and method of the activity; Another is to publicize the rules of the competition, introduce interesting activities and set prizes.
Three color photo illustration billboards: three different types of vehicle models, author photos and related text introduction.
C road signs (by the propaganda department) are posted on the roadside 3-5 days in advance as a means of publicity.
D. Post 8 posters (written by the Secretariat and posted by the Organization Department) in each group of publicity columns (1-7, 1 1);
Content: The starting time and place of the contest, participants (mainly teachers) and prizes for interesting activities, focusing on attracting students to watch.
E post two banners (made by the Ministry of Foreign Affairs and posted by the Organization Department).
One is hung in the student activity center; The other was posted at the competition site.
F Notify Yanda TV Station, School Newspaper, Liren Newspaper Group, Huanian and West Campus Radio Station to report. If possible, invite metropolis daily. (technical department is responsible)
G. receive the notification from the association for science and technology of each department and plan the car model contest together (the secretariat department is responsible).
2. Preparatory work for early-stage personnel
A. Inviting guests (the Ministry of Foreign Affairs is responsible)
Make invitations and invite guests. Invited guests include Zhang Yang, the team leader, etc. Chairman Duan led relevant personnel to deliver the invitation letter.
B It is required that the competition rules be formulated and officially released before1October 25th 10 (the technical department is responsible).
For referees, referees are members of the presidium of the Association for Science and Technology.
C all entries are required to submit written introduction and explanation before1October 26th 10 (the technical department is responsible).
Including the name of the work, technical characteristics and author information. Each production team writes its own commentary and determines the narrator.
D the moderator's draft is required to be completed (the technical department is responsible and the competition department gives support).
Moderator's requirements: a man and a woman, on June 27th 10, do a good job in the main draft and rehearsal before the competition to ensure the smooth hosting.
E it is required to prepare the speech of the leading teacher and the manuscript presided over by the teacher (prepared by the secretariat department).
3. Preparatory work for the preliminary project
A. Make ballot boxes and number cards (the Competition Department is responsible and the Technical Department provides support).
B. buy balloons, prizes, tape, mineral water, etc. (The Ministry of Foreign Affairs is responsible).
C. Making car model performance props (technical department is responsible)
D. Borrowing audio equipment (the Competition Department is responsible)
E. apply for desks and chairs (the organization department is responsible)
F. Revision of curtain-related words (responsible by the Propaganda Department)
The concrete process of intransitive verb activity
1. The site layout (standing stone) is required to be completed before 9:00.
A. move the works and related props to the site (the technical department is responsible).
B bring desks, chairs and audio equipment to the site (the organization department and the competition department are responsible).
C. Curtain posting (responsible for the organization department)
D. On-site props arrangement for the competition team (technical department is responsible)
The site is surrounded by warning belts, with off-site referees 1 person, 2 off-site referees and the number of off-site staff to be determined; Renesas track is used as a racing team track; Some lottery supplies and scorecards.
E. Site layout of fun activities (the Competition Department is responsible)
2. Activities carried out
A. At 9: 30, lead the teacher to enter the venue, and the activity officially begins.
B. The host introduced the guests.
C. The teacher announces the start of the competition, and the presiding teacher makes relevant presiding speeches.
D. the game host presides over the game.
The first part of the competition: the torch relay.
② Competition Section II: Multi-agent automobile performance of the Institute of Electrical Engineering.
③ Entertainment time?
④ Competition in the third quarter: exhibition competition (each group will compete according to the rules).
E. invite teachers to put forward important opinions and expectations.
F. Ask the teacher to leave.
G. hold a second fun activity, invite the audience to participate and award prizes?
3. End of the activity
(1) Group photo of all members of the Association for Science and Technology.
(2) After the game, all Association personnel are responsible for cleaning up the site.
(3) Complete the supply of publicity materials to Yanda TV station, school newspaper, Liren newspaper group, Huanian, West Campus radio station and other media (responsible for the secretariat department).
Seven. Detailed rules of the activity
Competition rules of competition groups
1. The competition team provides a set of basic components (including four wheels, a frame and a steering gear), and the team completes the assembly design scheme of the racing car according to the regulations.
2. The number of participants in each team shall not exceed 5.
3. Each team must submit the assembly design scheme of the racing car to the organizing committee of the competition. The competitions in the competitive group are divided into preliminary, semi-final and final.
Preliminary competition: review of revised schemes (there is no upper limit on the number of entries, and 10 design schemes are shortlisted).
Rematch: evaluation of the progress and production process of ten works (5-7 works are shortlisted),
Finals: Semifinalists compete at this stage.
4. The control circuit of the racing car can be controlled by wired or wireless remote control, and the competition team provides each team with a standby wireless remote control.
5. Each team will get 30 points at each stage. If they fail to complete the task according to the schedule, 10 will be deducted for each stage. If they fail to complete the task for two consecutive periods, they will be disqualified.
6. The team independently designed the wired control circuit, which can run normally. Each team will be awarded 10 for each stage, and each team will be awarded 20 points for independently designing wireless control circuits and operating normally.
7. The final score consists of the final score plus the score of each stage.
8. The motorcade that damaged tools or parts during the processing of racing cars shall be compensated at the original price. In the event of a major accident, in addition to compensation, its qualification will be cancelled.
9. The total scores of the first place, the second place and the third place are 30 points, 25 points, 20 points and 10 points respectively.
10. 2 seconds will be deducted every time you rush out of the runway during the race, and into the pit will deduct 10 second every time during the car race. If it stays in into the pit for more than 5 minutes, it will be disqualified.
Second, the rules of the exhibition group competition
1. Each team has a maximum of 5 people.
2. Evaluation of topic selection
(1) novelty (2) practicality (3) significance or prospect
3. Design evaluation
(1) innovation (2) structural rationality (3) technicality
(4) Application of advanced theory and technology
4. Production evaluation
(1) function realization (2) production level and integrity (3) cost performance of works.
5. The competition team will regularly check the work progress of the participating teams. If they fail to complete the specified tasks within the scheduled time for three times, the competition rules will be cancelled.
6. Tools and parts damaged in the process of machining should be compensated. Those who cause major accidents will be disqualified.
Competition rules of three model groups
1. Each team has a maximum of 5 people.
2. Mainly take the shape design as the evaluation standard and refer to the manufacturing process.
3. The competition team will regularly check the work progress of the participating teams. If they fail to complete the specified tasks within the scheduled time for three times, the competition rules will be cancelled.
4. Tools and parts damaged in the process of machining should be compensated. Those who cause major accidents will be disqualified.
Eight. Competition Award Setting and Scoring Rules
(1) Award Setting
(1) Racing team:
Number of vehicles: 5 vehicles
Awards: first prize 1 name, second prize 1 name, and 3 excellent prizes.
Rules of the game: try once on the track and get the highest score twice.
Runway: Renesas Runway
(2) Display group:
Number of works: 5
Awards: Best Design Award, Best Appearance Award, Best Technology Award,
Two awards for excellence
Evaluation rules:
Design (each project 10)
Function Realization Steering Design Chassis Design Total Score
mark
Appearance (each item 10)
Total score of overall aesthetic novelty
mark
Technology (each project 10)
Total production score of horizontal circuit for electronically controlled mechanical structure processing
mark
(3) Model group:
Number of works: 4
Awards: one for best design, one for best production and three for excellence.
Production (per project 10)
Total score of material fineness
mark
Design (each project 10)
Total score of oral expression of design concept and modeling design
mark
(2) the composition of the score and the scoring process
(1) popularity bonus points
The works with the highest popularity score will be given 5% competition score, and other works will be given a percentage of popularity score.
⑵ Creative bonus points
The work with the highest creative score will be given 10% of the competition score, and other works will be given the percentage of creative score.
(3) science and technology content plus points
The work with the highest scientific and technological content will be given 20% of the competition score, and other works will be given the percentage of scientific and technological content.
Scoring table?
Audience Scoring Card of the 6th Automobile Model Competition in liren college of yanshan university
The job number is123455678910112.
be popular
originality
technology content
Note: draw up to three lights per line. Please give it to the staff after filling it out.
Thank you for your support for the work of the Association for Science and Technology!
Office of Association for Science and Technology: Huo Da Association for Science and Technology 303 Laboratory: SN302 Welcome to consult and visit.
(4) The judges add points
The judges make comprehensive comments on each work and fill in the judges' bonus items, with the highest score of 10, and the corresponding works will be added with the judges' bonus items. (judges' bonus = competition score × (judges' bonus × 10)%)
Judge's Scoring Card of the 6th Automobile Model Competition in liren college of yanshan university
The job number is123455678910112.
score
Note: Please ask the judges to comment on the comprehensive level of the works and give full marks 10.
5] Comprehensive score
Comprehensive score = competition score+popularity score+creativity score+technology content score+judges' bonus points.
[6] Individual Award
Judging the best popularity award, the best creativity award and the highest scientific and technological content award through the results of the audience scorecard.
Note: each work can only participate in one of the awards, and the priority level is: 1 highest scientific and technological content award, 2 best creativity award and 3 best popularity award.
(3) Other explanations.
1. The jury has the right to make a ruling on acts not specified in these Rules. In case of any dispute, the jury's decision shall be regarded as final.
Any revision of these rules shall be decided and promulgated by the China Association for Science and Technology.
C the referee announces the start and end time of the game, and whether to add or subtract points. The assistant referee gives the answer sheet to the off-site staff to decide whether to add or subtract points. The staff recorded the addition and subtraction of each work and handed the answer sheet to the audience.
D. Off-site staff distribute scorecards and pens to the audience (the audience can vote for their favorite works) to maintain off-site order.
E, the judges ruled that each entry won the final comprehensive grade.
F, the comprehensive level also includes technical content, innovation consciousness, etc. Among them, competition results and ratings only account for a part.
(4) Other reward rules
During the competition, students will be issued with scoring cards, and at most three works will be selected for each item, and the corresponding points of the selected works on each card will be increased by 1 point.
Nine. Budget (List)
1. 3x5 billboards 15 yuan.
2.8 Poster * 4 yuan, 0.5 yuan
3. Road signs 10 yuan
4. Broadcast the draft and notify 5 yuan of the Association for Science and Technology.
5. Banner a 80 yuan.
6. Two cases of drinking water in 40 yuan.
7.2 Mike batteries, 10 yuan.
8. Warning belt 30m 50 yuan?
9. Invitation Letter 10 yuan
10. Balloon 2 packs of 20 yuan,
1 1. ballot box and selection card (self-made)
12. Two rolls of adhesive tape 5 yuan
13. Bonus 100 yuan?
* * * meter: 349 yuan
X. Emergency plan
1. In case of heavy rain on the day of the event, the event time will be postponed.
2. During the publicity period, the exhibition board will be taken back by a special person every day to avoid damage.
3. If it rains during the publicity period, the publicity on that day will be cancelled.
4. reconfirm whether the speakers present can be present the day before the event, and if anyone can't, adjust the activity process immediately.
5. Arrange mobile personnel in case of shortage of manpower.