First, the night test passed:
1. Before leaving the vehicle, check the lighting conditions of the vehicle. Low beam lights, high beam lights and fog lights can't be less.
2. When driving with the preceding vehicle, the distance between the two vehicles should be appropriately lengthened;
3. Pay attention to the traffic signs and construction signals on the road;
4. When meeting at night, if the other party does not turn off the high beam, it should immediately slow down and use the high beam and low beam continuously to signal the other party to turn off the high beam; If the other party still doesn't turn off the high beam, stop on the right side of the road to avoid it.
Second, the evaluation criteria:
If a student has any of the following circumstances during the examination, the examiner will decide that he failed the night exam.
1, unable to turn on the light correctly, unqualified;
2. When approaching the car in the same direction, use the high beam, which is unqualified;
3. When passing through sharp bends, steep slopes, arch bridges, crosswalks or intersections that are not controlled by traffic lights, the high beam and low beam signals are not used alternately, which is unqualified;
4. Those who do not use lights according to regulations are unqualified;
5. Use the high beam when turning at the intersection, which is unqualified;
6. When overtaking, do not change the far and near lights to remind the overtaken to be unqualified;
7. Poor judgment on low visibility road conditions, unqualified;
8. When driving on a road with street lights and good lighting, it is unqualified to use high beam lights.
Third, the night test mainly examines the use of car lights at night:
1, start the vehicle, turn on the light, and pay attention to the turn signal before starting the vehicle.
2, in the process of driving, pay attention to the reasonable use of low beam and high beam:
(1) When passing the car, it is about150m away from the oncoming car, and the low beam lamp must be used;
(2) When following the vehicle in front, you must use the low beam;
(3) When overtaking, on the one hand, turn on the turn signal, on the other hand, it is necessary to remind the vehicle in front with the change of distance light;
(4) When crossing, vehicles around the crossing must be reminded by far and near lights.
3. When driving at night, don't use fog lights when there is no fog or heavy rain.
4, driving at night, pay attention to control the speed. Generally lower than the maximum speed limit of the road.
5. When overtaking, pay attention to stabilizing the driving direction of the vehicle, don't stay too far to the right, and pay attention to pedestrians or vehicles on the right.
6. At night, this road looks whiter than other places. Pay attention to the road signs.
7, after crossing the bridge, uphill or downhill, can correctly estimate the vehicle driving position.