Subject 3 100 meter addition and subtraction? Subject 3 is addition and subtraction.
Subject 3 road driving skills test generally includes: getting on the bus, starting, driving in a straight line, adding and subtracting gears, changing lanes, stopping by the side, going straight through the intersection, turning left at the intersection, turning right at the intersection, crossing the crosswalk, passing through the school area, passing the bus stop, overtaking, turning around and driving at night.
The general knowledge test of safe and civilized driving includes: the operating requirements of safe and civilized driving, the knowledge of safe driving in bad weather and complex road conditions, the handling methods of emergencies such as flat tires, and the handling knowledge after traffic accidents.
/kloc-what are the requirements for the 0/00 meter addition and subtraction exam? To be precise, the 100-meter acceleration and deceleration gears are as follows. Let's first introduce the purpose, requirements, skills and action essentials of the 100-meter acceleration and deceleration gear.
Generally speaking, the acceleration and deceleration gear of 100 m is gradually increased from first gear to fifth gear within 100 m, and then gradually shifted from fifth gear to first gear. The 100-meter acceleration and deceleration gear mainly examines the students' understanding and application of gear shifting, so as not to stall or trip stop.
Objective: To evaluate the driver's proficiency in vehicle gears.
Requirements: The vehicle starts from the starting line of 100 meters, accelerates from the lowest gear to the highest gear within 100 meters, and decelerates from the highest gear to the second gear gradually, with a smooth movement in the middle.
Action essentials: mainly investigate the oil separation and cooperation.
The left foot never leaves the clutch, and the right hand never leaves the gear handle. After starting, refuel and upshift, and then downshift by 5 gears at 50m. Then (before 70m), start to brake, and lower the second gear. There is still time for the intermission. During the whole process, control the direction with your left hand and don't be distracted.
Theoretical analysis: when shifting gears, throttle first and then clutch-that is, first add oil to accelerate, then add oil and step on the clutch to shift gears.
When downshifting, brake first and then disengage, brake first to slow down, and then step on the clutch to downshift.
In the exam, the one who steps on the clutch first is considered to slide in neutral. When the brakes are continuously applied to a certain extent, the car body will shake, indicating that the engine has rotated with the fixed gear to do work due to braking resistance. At this time, it is necessary to step on the clutch and cut off the power transmission of the engine to avoid flameout.
On the engagement of shift oil: shift oil is in no particular order, and the accelerator pedal and clutch pedal should be carried out at the same time. If you lift the throttle first, the speed will definitely drop, and you can't reach the speed of your gear. If you step on the clutch again, you will definitely feel depressed and even lead to flameout. If you step on the clutch first and the accelerator is not lifted, there will be a phenomenon of coaxing oil. Therefore, neither is desirable and must be carried out at the same time. To shift gears, release the accelerator and step on the clutch at the same time, immediately shift gears, and then lift the clutch to the joint in time, immediately follow the oil to ensure that the release and stepping are at the same time.
Skills: First of all, after each shift is completed, you must give full throttle and make the next shift decisively; Shifting movements, including hand movements and foot movements, should be fast, correct and consistent.
100 meter addition and subtraction is a must? At present, it is not a compulsory exam, but a lottery in the venue, which may be set as a compulsory exam in the future.
/kloc-what are the main points of addition and subtraction in the 0/00 meter driving test? When the vehicle speed rises to the third gear, do not refuel, and then step on the clutch to engage the fourth gear and the fifth gear; Start downshifting immediately and shift to second gear. It will be fine!
What's the use of addition and subtraction 100 meter for driving test? The exam is to test your reaction speed, which can reflect whether you are suitable to be a prospective driver, otherwise why take the exam?
What is the test standard for addition and subtraction 100 meter? You add and subtract gears, and these are all recorded electronically. Don't play tricks, the simple one, step on the clutch, 2-3-4-5, brake -2, go uphill, and then start on the ramp.
Will Nanning Nine Exams be marked with 100-meter addition and subtraction files? What is the probability of drawing? Ask the experts to give you some advice. Our driving school doesn't teach such random things as addition and subtraction 100 meter, but no one can be sure, but this can be learned on the spot. Come on, step on the clutch in first gear, 2345,54321,and it's OK.
Chengdu C 1 driver's license examination subject 300 meters addition and subtraction file still test? Yes 100M, I was taking the exam some time ago, but now Chengdu has cancelled it, because this project has a high accident probability and high risk. On one occasion, a classmate bumped into a wall or flower bed during an exam at a hundred venues, and then the vehicle management office cancelled the project because it felt dangerous.
Is there a 100 meter addition and subtraction file in Guilin subject 3 exam? The motor vehicle driver's examination project has an operation of adding and subtracting files in the whole country.
Upshift operation
After hearing the voice prompt of "Please complete the movement of adding and subtracting gears", the examinee should shift the gear to the second gear. From the second gear, the speed should exceed 40km/h, and then downshift to the second gear.
Subject 3, also known as road test, is a part of motor vehicle driver's license test, and is the abbreviation of road driving skills and safe and civilized driving common sense test subjects in motor vehicle driver's test.
Different types of roads have different driving skills tests, which generally include: getting on the bus, starting, driving in a straight line, adding and subtracting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing crosswalks, passing through school areas, passing bus stops, overtaking, turning around and driving at night.
Examination requirements 1. Prepare for boarding.
Candidates must follow the instructions of the security officer, get close to the car body, circle the car (from the left front door to the back), and open the door to get on the bus after confirming safety. After getting on the bus, you will hear the voice prompt "Please prepare for the exam and conduct fingerprint verification". First, adjust the seat to suit your position, adjust the inside and outside rearview mirrors and fasten your seat belt. Then fingerprint verification. The fingerprint instrument is located under the air conditioning outlet on the left side of the steering wheel.
2. Driving at night:
After the fingerprint verification is successful, candidates should start the lighting operation after hearing the voice prompt "Start to simulate the use of night lighting, please follow the voice prompt" before the students start the daytime exam. The simulation test of night driving lights will randomly select three items from the following items for testing.
Mainly includes:
You will turn at the intersection, please use the correct light (use the low beam light)
You are driving on a road with poor visibility, please use the correct lights (turn on the high beam).
You will pass a sharp turn, please use the correct light (use the low and high beam alternately at least twice).
If you want to cross the slope, please use the correct light (alternately use the low and high beams at least twice).
If you want to cross the arch bridge, please use the correct lights (alternately use the far and near lights at least twice)
You will cross the crosswalk, please use the correct lights (alternately use the low and high beams at least twice).
You will cross an intersection without traffic lights. Please use the correct light (alternately use the low beam and the low beam at least twice).
If you want to overtake, please use the correct lights (first turn on the left turn signal, then alternately use the far and near lights at least twice, and then turn on the right turn signal).
You will meet other vehicles, please use the correct lights (turn on the low beam lights).
After the lighting simulation, candidates need to turn off the lights before taking the next exam.
Students who are selected for the night test should drive according to the actual road conditions of the night test.
begin
When you hear the voice prompt "Please start", step on the clutch, shift into first gear, turn on the left turn signal (more than 3 seconds), and observe the left rearview mirror (twist your head to the left). After confirming the safety, whistle, put the parking brake, start smoothly and turn on the turn signal. When starting on a slope, it is forbidden to slip back.
Turn right at the intersection
After hearing the voice prompt "Turn right at the intersection ahead", turn on the right turn signal (more than 3 seconds), press the guide arrow lane, and turn right to the carriageway.
turn round
After hearing the voice prompt "Please turn around ahead", candidates should turn on the left turn signal (for more than 3 seconds), observe the traffic situation at the left rear through the (left) rearview mirror, then slow down, shift to a low gear and drive into the U-turn area. When driving into the U-turn area, observe the left and right road conditions, drive into the new lane after confirming safety and turn off the left turn signal.
6. Go straight through the intersection
Candidates should slow down (brake), observe the road traffic situation and drive according to the signal light after hearing the voice prompt "Please go forward when crossing the intersection". When crossing the intersection, the speed should be less than 30 km/h. No parking at intersections.
7. Turn left at the intersection
After hearing the voice prompt "Turn left at the intersection ahead", turn on the left turn signal (more than 3 seconds), press the guide arrow lane and turn left to the driveway.
8. cross the bus stop
When hearing the voice prompt "crossing the bus stop", candidates should slow down (brake) or drive at a speed lower than 30km/h before entering the area, and observe left and right (twist their heads), pay attention to avoid buses and pedestrians, and confirm safety before passing.
9. Add and subtract files
After hearing the voice prompt of "Please complete the movement of adding and subtracting gears", the examinee should shift the gear to the second gear. From the second gear, the speed should exceed 40km/h, and then downshift to the second gear.
10. Meet the car
After hearing the voice prompt "There will be a car ahead", candidates should pay attention to the coming car ahead and drive on the right side of the driveway until the meeting is over. Pay attention to avoid other vehicles and don't press the non-motor vehicle lane line.
1 1. Overtake
After hearing the voice prompt "Please finish overtaking", candidates should turn on the left turn signal (more than 3 seconds), observe the traffic situation at the left rear through the (left) rearview mirror, then turn the steering wheel to the left and drive into the left lane to overtake. When overtaking, turn on the right turn signal (for more than 3 seconds) after confirming to keep a safe distance from the overtaking. At the same time, observe the right rear through the (right) rearview mirror, and drive into the original lane after confirming safety. When overtaking conditions are not available, you can wait until conditions permit to complete the overtaking action, and overtaking on the right side is prohibited.
12. Go straight.
After hearing the voice prompt "Please keep driving in a straight line", candidates should look forward and control the steering wheel with both hands to keep the vehicle driving in a straight line. It is forbidden to ride a bike on the road demarcation line.
13. Change lanes
After hearing the voice prompt "Please change lanes", candidates should turn on the (left) turn signal (for more than 3 seconds), and at the same time (turn left) observe the traffic situation in the rear through the (left) rearview mirror, and then turn the steering wheel to (left) to change lanes after confirming safety. When there is no lane change condition, candidates should slow down and wait for the condition to allow lane change. It is forbidden to change two lanes continuously.
14. Cross the crosswalk
After hearing the voice prompt "Please proceed through the crosswalk", candidates should slow down (brake) or drive at a speed lower than 30km/h before entering the area. If a pedestrian passes, please park your vehicle outside the safety line and wait for the pedestrian to pass the crosswalk.
65438+
After hearing the voice prompt "Go through the school ahead", candidates should slow down (brake) or enter the area when the speed is lower than 30km/h, and observe left and right (twist their heads), pay attention to avoid students and confirm safety before passing.
16. Drive to the roadside
After hearing the voice prompt of "Please pull over", candidates should turn on the right turn signal (for more than 3 seconds) and observe the traffic situation on the right rear side through the (right) rearview mirror. After safety is confirmed, park the vehicle (on the right side) in parallel within 30cm from the kerb (or the edge line of the real road), but do not press the kerb (or the edge line of the real road), stop the vehicle, pull up the parking brake and take neutral.
After hearing the voice prompt of "Pass the exam, please get off" or "Fail the exam, please get off", observe the traffic situation on the left rear. After confirming safety, open the door and get off, and the exam is over.
If you fail the exam for the first time, the voice prompts "Failed the exam, start the exam again". Please don't get off the bus, just follow the voice prompts to continue the exam.