Subject 2, Subject 3 Practical Skills
Driving test often changes slightly with the passage of time, especially now there are many people on the road, which puts forward higher requirements for drivers, and also needs to improve the difficulty of driving test accordingly, in order to better master driving skills and drive safely.
In the driver's license exam, the changes in subject 1 and subject 4 are almost negligible. After all, most people will not fail in the subjects they have recited. Accordingly, many novices panic as soon as they get to the second subject, because there are many projects, so they will quit if they don't practice; Because of the details of subject three, many students unconsciously failed the subject because of inattention.
So, what are the difficulties in subject 2 and subject 3?
First of all, the key of subject 2 is to control the clutch well.
When lifting the clutch, it must be slow, slow and steady, and it must be completed within the specified time of 2 10 second.
Parking in reverse is very difficult for many people, even if they get a driver's license, they often can't get into the car.
Pay attention to the style of the steering wheel when practicing, and remember when the steering wheel will return to the correct position after several turns. In addition, watch out, hit the direction in time, and adjust the body position according to the rearview mirror. Don't hit the direction when entering the warehouse, but fine-tune it.
At the beginning, I mainly learn the fine control between clutch and brake.
Judge the position of the car body, keep a proper distance when pulling over, control the speed, and keep enough power to go uphill.
When turning at a right angle, try to get close to the outside line within the right angle line.
Find a point to kill directly.
The third division is mainly about detail warfare.
Pay attention to gear speed matching, the first gear is used for starting, and the later acceleration needs to be changed. The gear should match the speed of the vehicle, and the downshift should be slowed down first, and the upshift should be accelerated first. In addition, pay attention to the cooperation in the usual practice, and don't bow your head when shifting gears.
Don't forget to turn on the turn signal.
Turn on the turn signal when starting, turning, changing lanes, overtaking and pulling over. The turn signal must be turned on for more than 3 seconds.