Examination requirements:
1. Prepare for boarding.
Candidates must obey the instructions of the security officer, get close to the car body, circle the car (from the left front door to the back), and open the door to get on the bus after confirming safety. After getting on the bus, you will hear the voice prompt "Please prepare for the exam and conduct fingerprint verification". First, adjust the seat to suit your position, adjust the inside and outside rearview mirrors and fasten your seat belt. Then fingerprint verification. The fingerprint instrument is located under the air conditioning outlet on the left side of the steering wheel.
2. Driving at night:
After the fingerprint verification is successful, candidates should start the lighting operation after hearing the voice prompt "Start to simulate the use of night lighting, please follow the voice prompt" before the students start the daytime exam. The simulation test of night driving lights will randomly select three items from the following items for testing.
Mainly includes:
You will turn at the intersection, please use the correct light (use the low and high beam alternately at least twice).
You are driving on a road with poor visibility, please use the correct lights (turn on the high beam).
You will pass a sharp turn, please use the correct light (use the low and high beam alternately at least twice).
If you want to cross the slope, please use the correct light (alternately use the low and high beams at least twice).
If you want to cross the arch bridge, please use the correct lights (alternately use the far and near lights at least twice)
You will cross the crosswalk, please use the correct lights (alternately use the low and high beams at least twice).
You will cross an intersection without traffic lights. Please use the correct light (alternately use the low beam and the low beam at least twice).
If you want to overtake, please use the correct lights (first turn on the left turn signal, then alternately use the far and near lights at least twice, and then turn on the right turn signal).
You will meet other vehicles, please use the correct lights (turn on the low beam lights).
After the lighting simulation, candidates need to turn off the lights before taking the next exam.
Students who are selected for the night test should drive according to the actual road conditions of the night test.
begin
When you hear the voice prompt "Please start", step on the clutch, shift into first gear, turn on the left turn signal (more than 3 seconds), and observe the left rearview mirror (twist your head to the left). After confirming the safety, whistle, put the parking brake, start smoothly and turn on the turn signal. When starting on a slope, it is forbidden to slip back.
Turn right at the intersection
After hearing the voice prompt "Turn right at the intersection ahead", turn on the right turn signal (more than 3 seconds), press the guide arrow lane, and turn right to the carriageway.
turn round
After hearing the voice prompt "Please turn around ahead", candidates should turn on the left turn signal (for more than 3 seconds), observe the traffic situation at the left rear through the (left) rearview mirror, then slow down, shift to a low gear and drive into the U-turn area. When driving into the U-turn area, observe the left and right road conditions, drive into the new lane after confirming safety and turn off the left turn signal.
6. Go straight through the intersection
Candidates should slow down (brake), observe the road traffic situation and drive according to the signal light after hearing the voice prompt "Please go forward when crossing the intersection". When crossing the intersection, the speed should be less than 30 km/h. No parking at intersections.
7. Turn left at the intersection
After hearing the voice prompt "Turn left at the intersection ahead", turn on the left turn signal (more than 3 seconds), press the guide arrow lane and turn left to the driveway.
8. cross the bus stop
When hearing the voice prompt "crossing the bus stop", candidates should slow down (brake) or drive at a speed lower than 30km/h before entering the area, and observe left and right (twist their heads), pay attention to avoid buses and pedestrians, and confirm safety before passing.
9. Add and subtract files
After hearing the voice prompt of "Please complete the movement of adding and subtracting gears", the examinee should shift the gear to the second gear. From the second gear, the speed should exceed 40km/h, and then downshift to the second gear.
10. Meet the car
After hearing the voice prompt "There is a car ahead", candidates should pay attention to the coming car ahead and drive on the right side of the driveway until the meeting is over. Pay attention to avoid other vehicles and don't press the non-motor vehicle lane line.
1 1. Overtake
After hearing the voice prompt "Please finish overtaking", candidates should turn on the left turn signal (more than 3 seconds), observe the traffic situation at the left rear through the (left) rearview mirror, then turn the steering wheel to the left and drive into the left lane to overtake. When overtaking, turn on the right turn signal (for more than 3 seconds) after confirming to keep a safe distance from the overtaking. At the same time, observe the right rear through the (right) rearview mirror, and drive into the original lane after confirming safety. When overtaking conditions are not available, you can wait until conditions permit to complete the overtaking action, and overtaking on the right side is prohibited.
12. Go straight.
After hearing the voice prompt "Please keep driving in a straight line", candidates should look forward and control the steering wheel with both hands to keep the vehicle driving in a straight line. It is forbidden to ride a bike on the road demarcation line.
13. Change lanes
After hearing the voice prompt "Please change lanes", candidates should turn on the (left) turn signal (for more than 3 seconds), and at the same time (turn left) observe the traffic situation in the rear through the (left) rearview mirror, and then turn the steering wheel to (left) to change lanes after confirming safety. When there is no lane change condition, candidates should slow down and wait for the condition to allow lane change. It is forbidden to change two lanes continuously.
14. Cross the crosswalk
After hearing the voice prompt "Please proceed through the crosswalk", candidates should slow down (brake) or drive at a speed lower than 30km/h before entering the area. If a pedestrian passes, please park your vehicle outside the safety line and wait for the pedestrian to pass the crosswalk.
65438+
After hearing the voice prompt "Go through the school ahead", candidates should slow down (brake) or enter the area when the speed is lower than 30km/h, and observe left and right (twist their heads), pay attention to avoid students and confirm safety before passing.
16. Drive to the roadside
After hearing the voice prompt of "Please pull over", candidates should turn on the right turn signal (for more than 3 seconds) and observe the traffic situation on the right rear side through the (right) rearview mirror. After safety is confirmed, park the vehicle (on the right side) in parallel within 30cm from the kerb (or the edge line of the real road), but do not press the kerb (or the edge line of the real road), stop the vehicle, pull up the parking brake and take neutral.
After hearing the voice prompt of "Pass the exam, please get off" or "Fail the exam, please get off", observe the traffic situation on the left rear. After confirming safety, open the door and get off, and the exam is over.
If you fail the exam for the first time, the voice prompts "Failed the exam, start the exam again". Please don't get off the bus, just follow the voice prompts to continue the exam.