How to remove the lampshade during vehicle maintenance?

When repairing the vehicle, the way to remove the lampshade is to pull the vertical edge of the headlight high beam twice with a utility knife and clean it slightly with a screwdriver. Start heating with a hot air gun. First, heat the sharp corners of the headlights. When the gloves feel a little hot, stop heating and scratch hard with both hands grasping the sharp corners. After the corners are slightly separated, continue to heat the gap of the whole headlight with a hot air gun. After heating, scrape the corner quickly and scrape hard, and you can remove the big lampshade of the car. The surface of the lampshade has a special coating, which is resistant to oxidation, sun and rain, and even ordinary sharp objects will not scratch. This coating process requires high temperature baking.

1. The car lampshade is connected with the headlight assembly. To remove the car lampshade, the whole headlight assembly must be removed, and the car lampshade cannot be replaced separately. Remove the headlight, and then remove the upper and lower screws. If there are screws on the lampshade and then remove the screws, you can remove the car lampshade, otherwise you can only replace the headlight assembly.

2. The car lampshade is broken. The best and most effective way is to replace the lampshade. If it is not replaced, it will probably lead to water inflow, which will not only affect the brightness of the lamp, but also lead to short circuit and circuit damage. It is estimated that some car owners will use adhesive tape or online sol to repair it, but these methods will seriously affect the light in car headlights, so try not to use this method. Remove the headlight lampshade and clean the colloid and dust in the groove. Fill the groove with new sealant, press the new lampshade tightly and wipe off the spilled sealant. It is best to test whether the lampshade is suitable before applying sealant to ensure that the colloid in the glue tank is clean, otherwise replacing the lampshade with a new one may affect the poor sealing performance. After completing the above process, dry the headlights and put them back in the car for normal use.

3. As the eyes of a car, once the lights are weakened or the bulbs are damaged, and the lampshade of the car turns yellow, it is necessary to repair or replace the car headlights in time, so as not to see the road clearly at night, because the sight of driving at night itself is not good, and if the lighting problem is added, the danger of driving at night will increase. The above is the answer to how to remove the lampshade when repairing the vehicle.