First of all, we should follow the "three wastes" pollution in management and adhere to the principle of "whoever pollutes will treat it". According to the "three wastes" emission standards promulgated by the state, arrange relevant personnel to draw up the "three wastes" control indicators as part of the skill operation procedures and post responsibility system. Strengthen the management of production skills, put an end to running, running, dripping and leaking, and prevent littering and littering. Do a good job in skill innovation, make comprehensive utilization, make maximum use of all kinds of capital and strength, and eliminate or reduce the "three wastes" within the scope required by the rules.
"wastewater treatment"
Waste water discharged from production or life should be cleaned and separated, treated separately (sewage can only be discharged after at least three processes of precipitation, purification and filtration), and recycled or recovered as much as possible. All kinds of dirty oil and wastewater containing toxic and harmful substances should be collected and treated after canning, and shall not be discharged at will. It is forbidden to directly discharge any untreated wastewater into the nearby water system.
"Waste concrete" treatment
All kinds of wastes or wastes should be stored in designated places and disposed of in accordance with relevant laws and regulations. Dumping at will is prohibited. Landing commercial concrete should be sorted out in time and stored in the designated place, and waste residue and waste water (or cement) should also be stored in the designated place and treated consistently.
"Waste dust" treatment
Cement and pulverized coal must be transported in a cool place to avoid leakage. The site must be equipped with a corresponding number of spray dust suppression equipment for emergency treatment in case of accidents. Find out the reasons, learn lessons, and put forward preventive measures and treatment suggestions.
In the process of commercial concrete production, it is necessary to effectively use and manage the existing environmental protection equipment. Do environmental protection equipment and production equipment work together. No one is allowed to stop, dismantle or damage environmental protection equipment at will. The work area should actively participate in the investigation and handling. The principle of "three-no-let-go" should be followed in this incident.